Preparing Digital Photo Files for Competition Submission

Preparing Digital Photo Files for Competition Submission

To prepare photo files for competition submission, first turn the entry requirements into a checklist, then export a separate submission copy and inspect that exact file before uploading it. Check pixel dimensions, accepted file format, color profile, maximum file size, compression, naming, and metadata requirements individually. Do not assume that a preset from another competition is suitable.
Choose your export settings from the instructions for your selected category and submission stage rather than relying on a universal preset. If a requirement is missing or ambiguous, seek clarification rather than treating a familiar setting as an official rule.
This guide gives you a practical workflow for moving from a finished photograph to a checked submission file without confusing your editable master with the version you enter.
1. Build a requirements sheet before editing your export
Start at the comme point de départ. Pour prendre une décision sur les droits, recherchez toutefois les conditions d’inscription applicables plutôt que de considérer les pages générales de présentation comme des réponses contractuelles. and locate the instructions relevant to your intended entry. Keep general information separate from technical requirements, and record where each requirement came from. Do not infer upload specifications from promotional copy or from examples of previously displayed images.
Make one checklist for each entry route if the requirements differ. Consider checking single-image entries, series, and later-stage file requests separately.
Record the following items:
- Accepted file extensions and any restrictions on format variants.
- Minimum and maximum pixel dimensions.
- Whether dimensions refer to width, height, longest edge, or shortest edge.
- Maximum file size and the unit used.
- Required color space and whether a profile must be embedded.
- Filename structure and whether identifying information is prohibited.
- Metadata, caption, watermark, border, and credit requirements.
- Any separate requirements for series order or supporting files.
Mark each item as confirmed, unclear, or not specified. Avoid quietly filling gaps with assumptions.
Save a dated copy of your notes. Before uploading, revisit the instructions to check whether anything relevant has changed. If two official pages appear to conflict, ask which instruction applies to your category rather than choosing the easier one.
2. Separate artistic preparation from technical compliance
Before you export, distinguish two questions: is this the photograph you intend to enter, and does the file meet the submission requirements?
Use a creative review to consider composition, tonal decisions, sequencing, and the relationship between the image and your statement. You can consult the page du manifeste as part of your contextual reading, but do not treat contextual material as a substitute for technical entry instructions.
Then freeze a working version of your edit. Consider keeping three clearly separated assets:
- An original capture or source file.
- An editable master containing your finished adjustments.
- A submission derivative exported for a particular entry.
Avoid resizing or repeatedly overwriting your only master to meet upload limits. Instead, name a dedicated export folder so you can distinguish final submissions from previews and experiments.
A simple folder structure might separate masters, export tests, and upload-ready files. Choose labels that make sense to you; the important part is knowing which file was actually submitted.
3. Interpret dimensions correctly
Check pixels before resolution labels
Read dimension requirements literally. Check whether the instructions specify a longest-edge limit or separate requirements for width and height. Before enlarging an image, establish whether the stated dimension is a maximum, a minimum, or an exact requirement.
For screen-based submission, record the required pixel dimensions and inspect both width and height in your export settings. If the rules also specify a PPI or resolution field, record and follow that requirement separately rather than using it as your only dimension check.
In your export dialog, check whether changing resolution also activates resampling. Review the resulting pixel dimensions rather than assuming the software changed only a label.
Preserve the intended composition
Do not force a photograph into a different aspect ratio merely because a sample entry looks that way. Confirm whether the instructions require a fixed shape, permit variable proportions, or describe only an edge limit.
If cropping is necessary, revisit the image deliberately. Check frame edges, spacing around important subjects, and the relationship between elements. Avoid letting an automatic fill or crop setting make that decision unnoticed.
For a series, inspect every photograph. Test your dimension settings on both horizontal and vertical frames, comparing each exported width and height with the wording of the rule.
If your source falls below a stated minimum, check whether enlargement is permitted. Seek clarification about eligibility before treating an enlarged export as ready to enter.
4. Choose format and color settings from the rules
Select the exact accepted format. Use the appropriate export or save command rather than editing the filename extension, then inspect the resulting file's reported format.
If multiple formats are accepted, compare them against your practical constraints rather than assuming that the largest file is the best submission. Consider the upload limit, the requested delivery stage, and whether the instructions require particular format options.
Treat color conversion as a deliberate step
Look for an explicit color-space requirement. If one is specified, choose it in the export workflow and check whether embedding its profile is also required.
Before choosing a command labeled “convert” or “assign,” consult your editing application's documentation and confirm which operation the requested workflow calls for. Avoid using an unfamiliar profile command simply because its name resembles the requested setting.
After export, reopen the file in an application that lets you inspect its profile information. Compare its appearance with your intended edit, paying particular attention to saturated colors, shadow separation, and subtle tonal transitions.
For monochrome work, do not assume that a grayscale file is automatically required. Follow the specified file and color requirements, including any instructions that apply to black-and-white entries.
5. Balance compression and the upload limit
If the accepted format uses adjustable lossy compression, begin with a high-quality export and measure the resulting file. If it exceeds the limit, change one setting at a time so you know which adjustment produced an acceptable version.
A practical order to test is:
1. Confirm that dimensions are within the requested range.
2. Remove optional export additions only when the rules allow it.
3. Adjust compression in small steps.
4. Reopen and inspect each candidate.
5. Stop once you have a compliant version you are comfortable submitting.
Avoid solving a file-size problem by reducing dimensions below a required minimum. Measure each exported file individually against the upload limit, including when you reuse a quality setting from another photograph.
Inspect areas that matter to your image: smooth skies, fine foliage, hair, fabric, grain, and high-contrast edges. Compare the exported candidate against your master at a useful viewing size and at close magnification.
If you notice a problem, return to the master and export again. Avoid making successive edits and saves to the same compressed derivative as your normal workflow.
6. Use a comparison table to make export decisions
Keep this table beside your export dialog. It is a working aid, not a replacement for the competition's instructions.
| Decision | What to verify | Question to resolve before export |
|---|---|---|
| Pixel dimensions | Minimum, maximum, and edge definition | Does the rule describe width, height, or longest edge? |
| Aspect ratio | Fixed crop or flexible proportions | Must I crop, or can I preserve the existing frame? |
| File format | Accepted extension and format options | Am I exporting the required format rather than renaming a file? |
| Color profile | Required space and embedding instructions | Which profile should the exported file contain? |
| Compression | Quality setting and measured file size | Does this version meet the limit without visible issues I reject? |
| Filename | Required pattern and anonymity rules | Does the filename include anything prohibited? |
| Metadata | Required captions, credits, or removals | What must remain, and what must be removed? |
| Series delivery | Order, count, and grouping instructions | Can I verify the sequence after upload? |
For broader contextual reading, the page À propos can sit alongside your research. Keep those notes distinct from the technical checklist so that interpretation and compliance remain separate decisions.
7. Check filenames, metadata, and identifying marks
Prepare filenames only after reading the naming instructions. Before using a descriptive personal label from your archive, check it against any anonymous-entry requirements.
If a naming pattern is provided, follow its spelling, separators, numbering, and extension instructions. Check for accidental double extensions and duplicate names. For a series, verify that the requested sequence is represented consistently wherever the instructions require it.
If no pattern is specified, consider a short, unambiguous name and avoid unnecessary punctuation. Treat this as an organizational recommendation, not an official competition rule.
Review metadata separately from the filename. Check the instructions for fields to retain or remove. Compare creator information, copyright text, captions, keywords, and location data against the stated requirements.
Do not strip all metadata automatically if some fields are required. After removing a name from a filename, conduct a separate anonymity review of metadata, visible marks, and accompanying text.
Inspect the image itself for watermarks, signatures, added borders, or text. If these are restricted, return to the appropriate master version and create a compliant derivative. Preserve your archival file separately.
8. Run a final inspection on the actual submission file
Review the exported file, not just the image open in your editor. The final inspection should cover both technical properties and visible content.
First, check the basics:
- Open the file from the upload-ready folder.
- Confirm format, dimensions, profile, and measured file size.
- Read the full filename, including the extension.
- Check the required metadata fields.
- Confirm that this is the intended edit and crop.
Next, inspect the photograph. Consider looking for unintended halos, harsh sharpening, banding, compression artifacts, dust spots, and export-related changes. Review both close detail and the whole composition rather than relying on only one view.
Finally, perform an administrative check. Match the file to the correct title, category, caption, and series position. If another person can review your checklist, ask them to compare the file against the written requirements rather than relying only on whether the image looks good.
Keep the inspected version unchanged once it is ready. If you revise it, repeat the relevant checks instead of assuming the previous approval still applies.
9. Work through two fictional submission scenarios
Fictional example: a detailed landscape exceeds the file limit
Imagine a competition requests JPEG files, specifies a longest-edge maximum, and sets an upload-size limit. Your landscape meets the dimension rule but exceeds the file-size limit.
Begin by confirming the actual exported properties. Then export a new candidate from your master using a modestly different compression setting. Compare fine branches, textured rock, and sky gradients before choosing it.
If you consider reducing dimensions, first confirm that the new dimensions remain within every stated requirement. Record the settings for this photograph, but measure other entries separately rather than assuming the same preset will fit them all.
Fictional example: an anonymous portrait series
Imagine another entry route requires an ordered portrait series with no identifying names in submitted files. Your archive filenames contain your surname, and your export preset retains creator metadata.
Make submission copies, apply the requested naming pattern, and review the relevant metadata fields. Check that your caption or accompanying statement does not unintentionally conflict with the anonymity instructions.
Then verify sequence in the upload interface. Do not assume that your local folder order is the final displayed order. Preserve a record linking each submission filename to its master without putting that private reference into the submitted files.
10. Examine common mistakes before uploading
Several habits deserve an explicit check rather than automatic acceptance:
- Reusing an old preset: compare every setting with the current entry instructions.
- Confusing file size with dimensions: check both the pixel dimensions and the measured storage size.
- Changing PPI without checking resampling: inspect the resulting dimensions.
- Applying one crop to every image: review each composition separately.
- Assuming black-and-white means grayscale: follow the actual color requirements.
- Removing all metadata indiscriminately: retain any required information.
- Trusting a preview alone: inspect the local export as well as the uploaded representation.
- Making a last-minute replacement: recheck the replacement file and confirm which version is attached.
After upload, review any available file listing, preview, category selection, and entry summary. If the interface provides a confirmation, retain it with your preparation notes. Do not use upload acceptance as a replacement for your own review of the written requirements.
Questions fréquentes
Should I always export at the highest available quality?
Use the entry requirements as your starting point. Consider a high-quality export, measure its file size, and inspect the result. If it exceeds the upload limit, test adjustments while keeping required dimensions and format intact.
What should I do if no color profile is specified?
Seek clarification through the organizer's stated contact route when possible. Check whether a separate technical document addresses color. Do not describe your preferred profile as an official requirement when none has been provided.
Can I use one export preset for every photograph?
Consider using a checked preset as a starting point, then review each output. Include orientation, crop, file size, naming, and series position in that individual review. Give the preset a clear label so you do not confuse it with a different entry's settings.
What should I keep after submitting?
Consider keeping your editable master, the exact submitted file, your requirements checklist, and any submission confirmation. Record the title, category, and sequence associated with each file. Keep these together as a reference if you later need to identify or reproduce the version you entered.
Comments are closed.
